Thursday, February 23, 2017

Corvette Masters. Maitland, Florida

I am fortunate to live about 40 minutes from Corvette Masters, a Vette specialist located right here in Central Florida, so after making an appointment the week before to have them inspect my car, I arrived at their facility early Tuesday morning for the inspection.

I was met by George, one of the mechanics, who promptly got my car up on a lift to check things out.

Above: George at Corvette Masters getting ready to start my car's inspection.

Above: The inspection was quite thorough, and took about 45 minutes.
Since I like to be as prepared as possible for these types of appointments, I had a list of all the things I would like addressed while suspecting that the guys at Corvette Masters would add to that list.

That they did!

My original list included things such as fixing the clutch pedal vibration, the annoying shifter rattle, erratic idle, the lack of a working A/C throttle stopper solenoid, door and window rattles, a few oil leaks, installing new dash speakers, and a few others.

Above: The new leaf spring on top of the original unit.

George pointed out that the new leaf spring I had purchased almost two years ago was not doing its job since it was pretty flat, something that the local mechanic who installed it failed to mention. Plus the fact that all brake hoses need to be replaced. And, as if that was not enough, he said that the trailing arms need a total rebuild or be replaced.

I knew they were going to be an issue, so I've been doing a little research and have talked with the folks at Vansteel about the exchange trailing arms they offer.

Using or restoring parts that came with the car is not a concern of mine, so I consider it a smarter investment to go with quality reconditioned O.E. trailing arms, and the folks at Vansteel have a stellar reputation for products they sell and services they provide.

They do offer trailing arm rebuilding, but downtime—while they recondition mine—would be an issue, so using readily available O.E. parts saves time and money.

Above: Removing the trailing arms and shims is not going to be fun.

Above: I may also have them replace a few brake lines while they are there.

I will ask the guys at Corvette Masters to clean up and detail some of the rear suspension components when the car is apart, but that project may be down the road, as my first order of business is to get the car driving well and rattle free.

My plan to start gathering parts in order to be ready for Robby Hooper and his crew at Corvette Masters to tackle the trailing arms as well as the leaf spring. Since I have to go get a few things from Eckler's this week, I will bring my paperwork as well as a few photos to see if they will warranty the unit they sold me almost two years ago. If that's not an option, I will have to purchase a new one.

As far as the shifter and clutch pedal rattles are concerned, Robby suggested I go to Eckler's Corvette in Titusville and get a reproduction replacement 4-speed shifter assembly, as well as the clutch and brake pedal bushings.

And since the driver's side dash will have to come off for the pedal assembly to be removed for repairs and new bushings, that will be an excellent opportunity to install the new Polk Audio dash speakers I ordered from Crutchfield.

I've said it many times before and it's worth repeating...

These cars are NEVER done!

Thanks for following.

No comments:

Post a Comment

Please share your thoughts.